York Audio MTCH 212 ESD-V2 (Kemper, WAV) [IR library]

The York Audio MTCH 212 ESD-V2 is based on a Matchless™ ESD 2×12 cabinet, equipped with Celestion M25 and H30 speakers, custom-built for Matchless™ amplifiers. This cabinet was purchased and subjected to extensive A/B testing to compare it to our other ESD cabinets. This was a clear winner, sounding better, feeling more “alive” and being more inspiring to play.
The tone has a rich midrange and warm low-mids with smooth highs that ring without being abrasive. Equally at home with single-coil pickups, humbuckers, and semi-hollowbody guitars, this cabinet excels at producing clean, edge-to-breakup, mid-boost tones that really sing.

✔️ Contents
263 kipr
1479 wav
Microphones used in this Cab Pack

Dynamic:
57m – Based on a modern Shure™ SM57
57v – Based on a vintage Shure™ Unidyne III SM57
58 – Based on a Shure™ SM58
SM7 – Based on a Shure™ SM7b
421m – Based on a modern Sennheiser™ MD421
421v – Based on a vintage Sennheiser™ MD421
906 – Based on a Sennheiser™ e906

Ribbon:
121- Based on a Royer™ R-121
160 – Based on a Beyerdynamic™ M160
313 – Based on a Shure™ KSM313

Condenser:
T49 – Based on a Neumann™ TLM 49
U47 – Based on a Telefunken™ U47

Ambient:
ROOM – Captured with a Telefunken™ U47
REAR – Captured with a Telefunken™ U47
SIDE – Captured with a Telefunken™ U47

Additional information

The York Audio MTCH 212 ESD-V2 is based on a Matchless™ ESD 2×12 cabinet loaded with Celestion M25 and H30 speakers custom made for Matchless™ amps. This cabinet was acquired and put through rigorous A/B testing to see how it compared to our other ESD cabinet. This was the clear winner that sounded better, felt more “alive,” and was more inspiring to play through.

The tone has rich midrange and warm low-mids with a smooth top end that chimes without being abrasive. Equally at home with single coil pickups, humbuckers, and semi-hollowbody guitars, this cabinet excels at clean, edge of breakup, and mid gain tones that truly sing.

Captured with twelve vintage and modern microphones through top of the line outboard equipment, this Cab Pack boasts 115 single mic shots on each speaker along with 11 H30 Mixes, 11 M25 Mixes, and 11 H30-M25 speaker blend Mixes for a total of 263 IRs !

The intuitive folder structure makes it easy to navigate your way to getting great tones that suit your individual tastes and needs with minimal effort.

Microphones used in this Cab Pack

Ribbon:
121- Based on a Royer™ R-121
160 – Based on a Beyerdynamic™ M160
313 – Based on a Shure™ KSM313

Condenser:
T49 – Based on a Neumann™ TLM 49
U47 – Based on a Telefunken™ U47

Ambient:
ROOM – Captured with a Telefunken™U47
REAR – Captured with a Telefunken™ U47
SIDE – Captured with a Telefunken™ U47

All products have been tested with Fractal Audio Systems™, Line 6™, Strymon™, and Kemper™ hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units.

York Audio products are licensed, not owned. It is illegal to share York Audio products, so please support our brand and ensure more great content by purchasing your desired products. All sales are final, as there are no refunds on digital goods.

All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.

All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit’s preferred length upon import.

Natural Phase and Minimum Phase versions are provided.

Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.

Kemper™ units ulitize 44.1k files.

Strymon™ Iridium and BOSS™ units utilizes 96k files.